Hydraulic Pump Assembly - Toro Reelmaster 5410 Series Service Manual

Hydraulic Pump Assembly

g213693
1. Manifold tube
2. Hose clamp (2 each)
3. Hydraulic hose
4. Barbed fitting
5. O-ring (2 each)
6. Socket-head screw (2 each)
7. Lock washer (2 each)
8. Flat washer (2 each)
9. Gear pump assembly
10. O-ring
11. Flange-head screw (2 each)
12. Traction cable
13. Traction cable bracket
14. Piston (traction) pump assembly
15. Flange nut (2 each)
16. O-ring (3 each)
Reelmaster ® 5410/5510/5610 Series
15216SL Rev C
17. 90° hydraulic fitting
18. O-ring
19. Hydraulic tube
20. Flange-head screw (2 each)
21. Flange-head screw (2 each)
22. Guard hoop
23. Driveshaft assembly
24. Bolt (2 each)
25. Flange nut (6 each)
26. O-ring (2 each)
27. 90° hydraulic fitting
28. Hydraulic hose
29. 45° hydraulic fitting
30. O-ring (4 each)
31. Hydraulic hose
32. Straight fitting (2 each)
Note: The traction pump and gear pump should be removed from machine as an
assembly. Once removed from the machine, pumps can be separated for service.
Figure 151
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.
Page 6–163
Hydraulic hose (2 each)
Hydraulic tube
Hydraulic hose
O-ring (2 each)
Straight fitting (2 each)
O-ring (2 each)
Flat washer (2 each)
Pump support bracket
Carriage screw (2 each)
Locknut (2 each)
Straight fitting
O-ring
Hose clamp
Hydraulic hose
Hydraulic System: Service and Repairs