Steering Relief Valve (R10) Pressure Test (5410/5410-G/5410-D/5510/5510-G/5510-D/5610) - Toro Reelmaster 5410 Series Service Manual

Steering Relief Valve (R10) Pressure Test
(5410/5410-G/5410-D/5510/5510-G/5510-D/5610)
g230030
Test Procedure
Hydraulic System: Testing the Hydraulic System
The steering relief valve (R10) pressure test should be performed to ensure that
the steering circuit relief pressure is correct.
1. Park machine on a level surface with the cutting units lowered and reel
engage switch O
FF
brake.
2. Read all Warning, Cautions, and precautions listed at the beginning of this
section.
Figure 109
. Ensure that the engine is shut off. Apply the parking
Page 6–96 Reelmaster ® 5410/5510/5610 Series
15216SL Rev C