Lift Relief Valve (SVRV) Pressure Test
(5410/5410-G/5410-D/5510/5510-G/5510-D/5610)
g230027
Test Procedure
Hydraulic System: Testing the Hydraulic System
The lift relief valve (SVRV) pressure test should be performed to ensure that
the lift circuit relief pressure is correct.
1. Park machine on a level surface with the cutting units lowered and reel
engage switch O
FF
brake.
2. Read all Warning, Cautions, and precautions listed at the beginning of this
section.
Figure 101
. Ensure that the engine is shut off. Apply the parking
Page 6–86
Reelmaster
®
5410/5510/5610 Series
15216SL Rev C