Installation Procedure For A Terminal Using A Direct Connection To A Dc Switch - Avaya DEFINITY Manual

Installing the MAPD
DC Switch
MAPD
External
MAPD Cable
Board
Figure 2-14. Installing a Terminal via Direct Connection in a DC Switch
Installation Procedure for a Terminal
Using a Direct Connection to a DC Switch
1. If you are installing a new terminal, unpack it according to the instructions
supplied with the terminal.
2. Place the terminal on a suitable table within 15 feet of the switch cabinet if
you have a 20-foot ED1E434-11G311 cable, or within 45 feet if you have a
50-foot ED1E434-11G311 cable, and connect the keyboard.
2-28 Issue 3 May 2002
RJ45 to LAN
DTE TERMINAL CONNECTION
H600-258-1
Null Modem
DTE
RS232
ADMIN/PORT B
DCE TERMINAL CONNECTION
H600-258-1
Null Modem
DTE
Group 311
Maint/
Port A
Cable
Avaya Services Remote Access
DCIU (Reserved for future use)
*
! CAUTION:
Modem must be nongrounded (that is,
the modem must be isolated from the ground).
Group 311 Cable
116A
DCE
H600-258-1
Group
Null Modem
116A
DCE
Tip/
Ring
*
Modem
DTE
DCE
311
Cable