Avaya DEFINITY Manual page 272

DLG System Administration
Field Name
Messages to the
DEFINITY system
Messages from the
DEFINITY system
Messages Period
(minutes)
Use this screen as follows:
To change the port's service state:
1. Press
2. Press
3. The following prompt appears: Are you sure? (Y/N). Type Y
To update the screen with current information, press
To close a port's TCP connection:
1. Press
2. Press
3. The following prompt appears: Are you sure? (Y/N). Type Y
To set the Message Collection Period for a port, select the port and press
MSGPER
administered, pressing
6-50 Issue 3 May 2002
Description
Read-only. The number of messages sent to the
DEFINITY system in the last message collection period.
Read-only. The number of messages sent by the
DEFINITY system in the last message collection period.
The time period (in minutes) during which messages are
sent and received. This is a per-port number entered on
the Message Collection Period screen. Default = 30.
or use the arrow keys to move to the desired port.
TAB
to toggle the service state:
STATE
NOTE:
Busying a port out causes that port's TCP connection (if one
exists) to be closed. No new connections are permitted on that
port until the port is placed back in service.
and press . The DLG Port Status/Control screen
RETURN
reappears, showing the changed state.
If you type N and press
screen immediately reappears.
or use the arrow keys to move to the desired port.
TAB
to close the port's TCP connection.
DROP
NOTE:
New connections are permitted on this port.
and press . The DLG Port Status/Control screen
RETURN
reappears, showing the change.
If you type N and press
screen immediately reappears.
. The Message Collection Period screen appears. If no ports are
MSGPER
the DLG Port Status/Control
RETURN
the DLG Port Status/Control
RETURN
does nothing.
UPDATE