Avaya DEFINITY Manual page 248

DLG System Administration
Field Name Description
Port Port number used on the DEFINITY system. Valid range is
1 to 12. Each port can only be assigned once.
Client Name or Host name or IP address of the client machine authorized to
IP Address connect to this port. (Network name of the adjunct.) Must be
resolvable by the local host table, or be an IP address.
Maximum field size = 20 characters.
Client Link Link number from 1 to 8, used by client when connecting to
this port, if client has more than 1 logical link into the DLG.
Default = 1.
Client Status Read-only. Either in use or idle. Idle client states may
be modified or deleted. If you attempt to delete a port which
is in use, the ASAI link associated with that port is
disconnected.
Use this screen as follows:
To delete a port:
1. Press
2. The following prompt appears: Are you sure? (Y/N). Type Y
3. Repeat steps 1 and 2 until you have deleted all desired ports. Then
To add a port, press
To update the screen with current information, press
6-26 Issue 3 May 2002
or use the arrow keys to move the cursor to the line you
TAB
want to delete, and then press
and press .
RETURN
If you type N and press
beginning of the line and the line is not deleted.
press and the Main Menu reappears.
CANCEL
to access the Add Client Link screen.
ADD
. (This deletes the entire line.)
DELETE
, the cursor reappears at the
RETURN
.
UPDATE