Avaya DEFINITY Manual page 295

Sample Customer Configurations
Example 2. Multiple Secure LANs
Host name = lgateserver
IP address = 135.20.1.1
MAPD
Subnet mask = 255.255.255.0
System
Default gateway = 135.20.1.100
Assembly
(The route to 135.20.3 network
is 135.20.1.200.)
Host name = client 1
IP address = 135.20.2.1
C1
Subnet mask = 255.255.255.0
This sample configuration shows the CV/LAN application with different clients on
networks physically different from that of the MAPD system assembly. The default
gateway leads to clients C1 and C2, and gateway 2 leads to client C3. This
sample configuration requires that the CV/LAN application and the clients be
administered, as follows:
Administer the system assembly:
1. From the Main Menu, choose TCP/IP Administration. Then choose
2. From The TCP/IP Administration Main Menu, choose Local Host
IP address = 135.20.3.100
Subnet mask = 255.255.255.0
Gateway 2
IP address = 135.20.1.200
Subnet mask = 255.255.255.0
This Host.
a. Change the host name to a name you have made up
(lgateserver in this example).
b. Do the same for the host IP address (1354.20.1.1 in this
example) and, if subnetting is used, the subnet mask
(255.255.255.0 in this example).
Table.
a. Delete the default client.
b. Press to access the Add Host Screen. Add the host
ADD
name and IP address for client 1 (C1).
C3
IP address = 135.20.1.100
Subnet mask = 255.255.255.0
Default
Gateway
IP address = 135.20.2.100
Subnet mask = 255.255.255.0
Host name = client 2
IP address = 135.20.2.2
C2
Subnet mask = 255.255.255.0
Issue 3 May 2002
Host name = client 3
IP address = 135.20.3.1
Subnet mask = 255.255
255.0
E-3