Avaya DEFINITY Manual page 303

Returning the MAPD System to its Original State
15. Restore the customer's system configuration from the backup SanDisk
PCMCIA FlashDisk using the following menu steps:
16. After the customer's system configuration is restored, reboot the system:
NOTE:
If the CV/LAN application was installed, the UNIX kernel will be rebuilt when
the system is shut down. This will take several minutes. In addition, when
the system is coming up, a new kernel environment will be setup, which may
also take a few minutes.
17. Following the reboot, have the customer log in at the login prompt.
Select "Maintenance" from the Main Menu.
Select "Removable Media Operations" from the Maintenance Menu.
Select Restore Configuration Data from Removable Media
Operations.
Return to the "Maintenance" Menu.
Select "Reset System (CV/LAN).
Select Reboot System.
Issue 3 May 2002 F-5