Avaya DEFINITY Manual page 219

Field Names and Descriptions
Field Name
DEFINITY Port State
(continued)
Number of Client
Connections
CV/LAN Service State
Messages to the
DEFINITY
Messages from the
DEFINITY
Message Period
Use this screen as follows:
To change the port's CV/LAN service state:
1. Press
2. Press
3. The following prompt appears: Are you sure? (Y/N). Type Y
Description
BUSIEDOUT — The BRI Port is administered on
the DEFINITY system but has been busied out in
the BRI driver on the MAPD.
SW INTF DN — The DEFINITY system interface
(angel) is down.
SW INTF DN BSY — The DEFINITY system
interface (angel) is down and the BRI Port has
been busied out in the BRI driver on the MAPD.
Read-only. Number of currently connected clients.
Either in service or out of service.
Read-only. The number of messages sent to the
DEFINITY system in the last message collection
period.
Read-only. The number of messages sent by the
DEFINITY system in the last message collection
period.
The time period (in minutes) during which messages
are sent and received. This is a per port number.
Default = 30.
or use the arrow keys to move to the desired port.
TAB
to toggle the Service State.
STATE
NOTE:
Busying a port out causes all TCP connections on that port (if
any exist) to be closed. No new connections are permitted on
that port until the port is placed back in service.
and press . The CV/LAN Port Status/Control screen
RETURN
reappears showing the changed state.
If you type N and press
screen immediately reappears.
, the CV/LAN Port Status/Control
RETURN
Issue 3 May 2002 5-55