Avaya DEFINITY Manual page 301

Returning the MAPD System to its Original State
Booting UnixWare...
UnixWare 2.1.2 for the Intel386(tm) Family
Copyright 1984-1995 Novell, Inc., 1996 The Santa Cruz Operation, Inc.
All Rights Reserved.
TN800 driver (mapdmux) - Version 0.1
MAINT DRIVER INIT
RMB DRIVER INIT
0:0,7,0: HBA
0,0,0: DISK
1:0,7,0: HBA
0,0,0: DISK
NOTE:
If the screen shows LynnSoft PC Card Software loaded, then you did not
successfully boot from the PCMCIA Disk. In this case, you must reset (either
by power down, reboot, or through the remote maintenance interface) and
attempt again.
The login prompt appears when the system has finished rebooting.
NOTE:
When the system is rebooted, the console will be reset while the firmware is
downloaded. The download process should take less then 30 seconds after
the initial login prompt is displayed. Press the
login prompt again.
Welcome to UnixWare 2.1.2
The system's name is definity.
Console Login:
TN800 MAPD Remote Maintenance Port
defaults are:
LCP: 9600 8N1 COM2: 9600 8N1
RMP: 9600 8N1 COM1: 9600 8N1
TN800 MAPD Remote Maintenance Port
defaults are:
LCP: 9600 8N1 COM2: 9600 8N1
RMP: 9600 8N1 COM1: 9600 8N1
: (ide,1) Generic ESDI/IDE/ATA
: Generic IDE/ESDI
: (ide,2) Generic ESDI/IDE/ATA
: Generic IDE/ESDI
.
.
.
1.00
1.00
key to display the
RETURN
Issue 3 May 2002 F-3