Minolta EP5000 General, Mechanical/Electrical page 172

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
2–7. FUSING UNIT
(1) Removal of the Fusing Unit
1156D073AA
(2) Disassembly of the Fusing Unit
1156D074AA
1156D075AA
1156D076AA
Cover Harness Cover
Fusing Unit
1156D077AA
1. Open the Left Door.
2. Swing down the Front Door.
3. Remove one screw and the Fusing Unit.
1. Remove two screws and the Front Cover.
2. Unplug the connector of the Heater Lamp on the front.
3. Remove three harness holders.
4. Remove the Heater Lamp cord from the two edge covers.
5. Remove two screws and the front lamp holder.
6. Remove two screws and the cover.
NOTE
At reinstallation, position the cover between the
Fusing Unit and harness cover.
D-53