Minolta EP5000 General, Mechanical/Electrical page 247

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
Tech. Rep. Mode " Tech. Rep. Choice
Touch Panel Display
Image Exposure
Simplex/Duplex
Bin Movement
Universal Tray 13"x
Universal Tray 14"x
Automatic feeding
adjust
Stack
Vary the Vg voltage to set the desired image density.
Display Description
47 Vg –90V
48 Vg –60V
49 Vg –30V
" 0V
50 Vg
Select the copying mode types that can be selected in "Orig. " Copy
Default" of User's Choice.
Both Permits selection of all copying modes.
Permits selection of 2-sided copying modes only.
Duplex only
Select whether or not the Sort Bins will automatically move upward
after the last copy is ejected into the Bins.
After the last copy, the Sort Bins automatically
ON
move upward.
After the last copy, the Sort Bins do not move upward.
OFF
Set the inch size of paper to be used in the Universal Tray.
8½" 8¼"
Set the inch size of paper to be used in the Universal Tray.
8½" 8¼"
Select whether to display the number of originals that need to be returned
when a jam occurs while using the ADF.
YES
Select whether or not the Sorter automatically stacks the copy sets after
the last copy is ejected into the Sort Bins when there are 20 or fewer
copy sets made in non-staple mode.
Mode 1 The copy sets are not stacked.
Mode 2 The copy sets are stacked.
S-23
Operation
Display Description
51 Vg +30V
52 Vg +60V
53 Vg +90V
54 Vg +120V
8"
NO