Minolta EP5000 General, Mechanical/Electrical page 65

Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
<Paper Separator Finger Front-to-Back Moving Mechanism>
The Paper Separator Fingers are also moved over a given distance to the front and rear
so that they will contact wider areas of the surface of the PC Drum, thus preventing local-
ized damage to the PC Drum surface.
D The Swash Cam mounted on the Pivot Pin of the Finger Operating Lever is moved
through steps by means of the Ratchet wheel and SL1, causing the Swash Cam to
push the Finger Shaft.
D The lateral movement of the Paper Separator Fingers is 3.5 mm (which is equivalent
to 60 times energization of SL1).
SL 1 Energized
Pawl (A) is raised.
The Swash Plate is locked
in position by Pawl (B).
SL 1 Deenergized
Pawl (A) pushes the Swash Cam
downward to turn it one notch.
Ratchet Wheel
1136M066AA
Paper Separator Finger Shaft
M-51
1136M065AA
Swash Cam
1136M067AA