Iu Timing Belt - Minolta EP5000 General, Mechanical/Electrical

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
3-4. ADJUSTMENT OF BELT TENSION
z Important
D Make sure that all gears are in positive mesh with each other and the belts snugly fit in the
pulley grooves.
D Each belt should flex a little when finger-pressed down on the location indicated by the arrow.
Belt
(1) Paper Take-Up Unit Timing Belt
(2) Developing Unit Timing Belt
(3) Fusing Unit Timing Belt
(4)

IU Timing Belt

Loosen two screws that secure the Tension Lever. Move the Tension Lever in the direction of the arrow two
to three times. When the belt tension is correct, tighten the two screws.
Move lever 2 to 3
times, then
tighten screws.
350 ± 100 g
300 ± 100 g
Tension
300 ± 100 g
350 ± 100 g
350 ± 100 g
350 ± 100 g
Move lever 2 to 3
times, then
tighten screws.
350 ± 100 g
350 ± 100 g
Move lever 2 to 3
times, then
tighten screws.
D-66
Deflection (Reference only)
Approx. 3 mm
Approx. 4 mm
Approx. 3 mm
Approx. 5 mm
1156D172AA