Minolta EP5000 General, Mechanical/Electrical page 262

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
Touch Panel
Display
Sorter Check
Transport Motor
Bin Movement
Stapling
Paper Aligning
Stack move
Tech. Rep. Mode " Accessory Test
Enables the following operation checks to be performed for the Sorter.
Pressing the Start key energizes the Transport Motor to turn the various
Transport Rollers.
Note: The 10-Bin Sorter is not operated.
Pressing the Start key energizes the Bin Moving Motor to move the bins
up and down.
Pressing the Start key runs a stapling sequence if paper is loaded in the
1st Bin. If no paper is loaded, only a paper clamp motion occurs.
Pressing the Start key causes a paper aligning motion to occur for the
width of the paper currently selected for use.
Pressing the Start key begins a sequence in which paper is stacked in
order starting with the paper loaded in the 1st Bin.
When "Next" is touched after any of the Sorter Check functions has been
selected, the "Input Check" screen appears. When that particular check
operation is then run with this screen on the Touch Panel, either 1 or 0 is
shown after each sensor according to its state.
Paper Aligning Bar Home
Bin Empty
Paper Clamp Position
Paper Clamp Home
Staple Paper Detect
S-38
Setting
Stapler Home
Bin Home Position
Staple unit FD move
Staple Unit CD Constant Position
Gate Unit constant Position
Sort path constant Position