Minolta EP5000 General, Mechanical/Electrical page 193

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
Next
5. Touch twice to show the "Tech. Rep. Choice 3" menu on the screen.
6. Observing the image density of the sample copy, touch the shift key A or " to change the setting
for "Image Exposure".
7. Touch Enter
to validate the setting.
8. Run the F5 operation again.
Setting Instructions
D If the image density is low, decrease the setting value.
D If the image density is high, increase the setting value.
D If the image density does not fall within the specifications through one setting, try another
setting.
1156D146CA
Touch This Key Twice.
NOTE
Be sure to touch Enter before pressing the Panel Reset Key to return the copier to the Basic screen.
If this is not done, the old setting remains valid.
D-74
1156D150CA
Touch This Key
if ID is High.
Touch This Key
if ID is Low.