Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
1149SBM0701A
7-1. AlDC Sensor
To provide image stabilization control, this copier has AlDC Sensor PWB-G fitted to
the Cleaning Unit of the Imaging Unit. The sensor is used to detect the toner density
and background level on the PC Drum.
Operation
1: The PWB-G LED projects approx. 950-nm infrared light onto the surface of the PC
Drum.
2: The PWB-G phototransistor detects the amount of light reflected back.
3: The phototransistor outputs a voltage corresponding to the intensity of the light
reflected back.
AIDC Sensor
Toner Density on PC Drum
High
Low
Output
PC Drum
Image Transfer/Paper Separation Coronas
Light reflected
Output Voltage
Small
High
Large
Low
M-12
LED Power
GND
Supply
1149M005AA