Minolta EP5000 General, Mechanical/Electrical page 173

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
1156D078AA
1156D079AA
1156D080AA
1156D081AA
1136D213AA
7. Remove one screw and the Heater Lamp cord in the rear.
8. Remove the Heater Lamp cord from the locking edge cov-
er.
9. Remove three screws and the rear lamp holder.
10. Remove the Heater Lamp cord from the wiring saddle.
11. Remove the Heater Lamp.
12. Remove four screws and the Upper Cover.
13. Remove two screws and the Upper Fusing Paper Separa-
tor Finger mounting bracket.
NOTE
When reinstalling the Upper Fusing Paper Separator
Finger mounting bracket, be sure that both ends
of the bracket are in tight contact with the frame.
D-54