Minolta EP5000 General, Mechanical/Electrical page 189

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
7. Touch Menu on the screen to show the Tech. Rep. mode menu again.
8. Touch Level History
inside the Front Door.
9. Then, press the Panel Reset Key to return the copier to the Basic screen.
z Should the F8 operation be run when the starter has not been replaced, check that the "ATDC Ref. Level"
value on the "Level History" screen matches that written on the Adjust Label. If they do not agree with
each other, change the "ATDC Ref. Level" value on the screen so that it matches the value on the Adjust
Label.
and enter the value for the "ATDC Ref. Level" on the Adjust Label affixed
1156D143CA
Enter This Value on the Adjust Label.
1156D143CA
Touch the shift key A or " to change
the value and touch Enter to validate the
new setting.
D-70
1156D168CA
1156D169CA