Minolta EP5000 General, Mechanical/Electrical page 248

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
1149SBS050403A
3. System Input
D This function allows the Tech. Rep. to change the fixed zoom ratios, set the paper size, define the mar-
keting area, configure for the Key Counter, and input the telephone number.
Touch Panel Display
Change Fixed Zoom
Ratio
Paper Size Input
Marketing Area
Key Counter
Telephone # Input
Tech. Rep. Mode " System Input
Change a fixed zoom ratio to a desired value in the range between X0.500
and X2.000.
<Procedure>
1. Select the fixed zoom ratio to be changed and clear the setting by pressing
the Clear key.
Note: If a ratio is mistakenly cleared, pressing the Panel Reset key will
recover the ratio.
2. Enter the new zoom ratio from the 10-Key Pad.
3. Touch "Enter" to validate the new setting.
Set the size of the paper used in each paper source.
<Procedure>
1. Select the paper source for which the paper size is to be set (on the Paper
Size Input 1/2 screen).
2. Then, the Paper Size Input 2/2 screen appears. Using the Y or B key,
select the paper size.
3. Touch "Enter" to validate the paper size setting.
Select the marketing area to set the paper size and fixed zoom ratios.
MC
MJ
Note: Be sure to initialize the copier after the marketing area has been
selected.
Select whether or not to inhibit copying if a Key Counter is not inserted
when the copier is equipped with a Key Counter.
ON Inhibits copying if the Key Counter is not inserted.
OFF Permits copying even if the Key Counter is not inserted.
Note: Be sure to select "ON" when the copier is equipped with a Key
Counter.
Input the telephone number that will appear on the Touch Panel when a
malfunction occurs in the copier.
<Procedure>
1. Enter the phone number (consisting of up to 19 digits) from the 10-Key
Pad.
Note: Use the Interrupt key to enter a hyphen "–."
2. Touch "OK" to validate the phone number setting.
S-24
Operation
MH Other Areas