Machine Status; Admin. Mode - Minolta EP5000 General, Mechanical/Electrical

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
1156SBS050411A

11. Machine Status

D This function shows the codes of isolated malfunctions which are currently present. This screen is also
accessible by touching the wrench mark shown at the bottom left corner of the Basic screen under nor-
mal operating conditions.
Touch Panel
Display
Machine Status Of the malfunction codes listed below, those that have occurred are dis-
played, together with the functions that are disabled by these malfunctions.
Up to five isolated malfunctions are shown. When a sixth isolated malfunction
occurs, the copier considers it as an ordinary malfunction. Even if there are
less than five isolated malfunctions, if there are isolated malfunctions occur-
ring at all paper sources, the next isolated malfunction will be regarded as an
ordinary one.
<Clearing Procedure>
With the Machine Status screen on the Touch Panel, swing open and close the
Front Door to clear all the isolated malfunctions.
1149SBS050412A

12. Admin. Mode

D This function is used to enter or change the administrator number, in addition to the functions set in the
"Administrator Mode" available from User's Choice.
Touch Panel
Display
Copy Track
Copy Track Data
Max. Copy Sets
User Help
Administrator # From the 10-Key Pad, enter a 4-digit number (0000 to 9999) that serves as an
Input ID number for opening the "Admin. Mode" of User's Choice.
Tech. Rep. Mode " Machine Status
Setting
Malfunction Code
C004d/45
C0350 to 52
C09XX
C0dXX
C0F2X
C0F7X
C0FEX to FX
C0b3X / 5X to 7X
Tech. Rep. Mode " Admin. Mode
Setting
See "Administrator Mode" of User's Choice.
S-40
Description
Cooling Fan Motor malfunc-
tion (Ventilation/Fusing
Section)
SP communication failure
Paper take-up failure
Duplex Unit malfunction
Faulty AIDC Sensor
Faulty Paper Empty Sensor
Faulty Original Size Detecting
Sensor
Sorter malfunction