Adjusting Image Position ([Image Position]); Printing A Chart - Konica Minolta bizhub C3100i User Manual

8.4 Adjusting Image Position ([Image
Position])
If the output image is misaligned, enter the adjustment value to make the correction.

Printing a Chart

1.
Load either of the following paper sizes into the paper tray to be adjusted.
 8.5×11
 A4
2.
Press the <Menu> button.
3.
Press the or
4.
Press the or
5.
Press the or
6.
Press the or
7.
Press the or
8.
When an execution confirmation message appears, press the
A chart will be printed.
9.
Check the printed chart.
If the output image is aligned properly, a line will be printed 10 mm from the edge of the paper. If the
line is misaligned, adjustment is necessary.
10 mm
10 mm
A square symbol is printed on the trailing edge of the paper to display the paper feed direction. One

square is printed on the front side, and two squares
When adjustment of [Lead/Side Registration] is necessary

button, select [Maintenance], and press the
button, select [Image Position], and press the
button, select [Print Chart], and press the
button, select the tray for adjustment, and press the
button, select [1-Sided] or [2-Sided], and press the
Paper feed direction
button.
button.
button.
10 mm
10 mm
are printed on the back side.

8.4 Adjusting Image Position ([Image Position])

button.
button.
button.
109