Configuring The Poe Port - Avaya 8300 Configuration

PoE configuration using the Device Manager
PoE card tab fields
Variable definitions
Use the data in the following table to help you use the PoE card tab fields.
Power
OperStatus
ConsumptionPower
PwrAdmin
PwrPriority
DeviceDetectType
UsageThreshold
NotificationControl
BackupPresentStatus
BackupActivatedStatus

Configuring the PoE port

Configure the PoE port on the Avaya Ethernet Routing Switch 8300 to detect and manage the
power distribution.
Procedure steps
1. Locate a slot containing a PoE card.
2. Select a PoE port.
34 Configuration — Power over Ethernet
Field
The nominal power of the Power Source Equipment (PSE)
measured in watts.
The operational status of the main PSE.
The measured usage power expressed in watts.
Enables or disables the main power administration.
Sets the power priority for the PoE card. Options are low,
high, and critical.
Is either p802dot3af or p802dot3afAndLegacy.
The usage threshold is expressed in percent. It compares
the measured power and initiates an alarm if the threshold
is exceeded.
Enable or disable notification control.
Indicates the presence of a backup PSE.
Identifies the activation status of the backup PSE. A value
of true means the backup PSE is activated. A value of false
means no backup PSE is activated.
Description
May 2011