Enabling And Disabling Poe Card Power Administration; Configuring The Poe Card Power Usage Threshold - Avaya 8300 Configuration

PoE card settings configuration navigation
•

Enabling and disabling PoE card power administration

•

Configuring the PoE card power usage threshold

• Configuring the PoE card power allocation priority
• Configuring the PoE card power limit
• Enabling and disabling the notification control
Enabling and disabling PoE card power administration
Enable the PoE card power administration on the Avaya Ethernet Routing Switch 8300 to
configure it for the required powerflow.
Prerequisites
You must log on to the Global Configuration mode in the ACLI.
Procedure steps
1. Enable the PoE card power administration by using the following command:
2. Disable the PoE card power administration by using the following command:
Configuring the PoE card power usage threshold
Configure the card power usage threshold for the Avaya Ethernet Routing Switch 8300 system
for the correct power consumption.
Configuration — Power over Ethernet
no poe shutdown slot<slotlist>
poe shutdown slot
Important:
If you install 8348TX-PWR or 8348GTX-PWR modules into an 86xx chassis, PoE
is disabled and you cannot enable it.
Enabling and disabling PoE card power administration
on page 51
on page 51
on page 52
on page 53
on page 54
May 2011 51