PoE configuration using the ACLI
Variable definitions
Use the data in the following table to help you use the poe limit slot<slotlist>
command.
Variable
<37-800>
Enabling and disabling the notification control
Enable or disable the transmission of all notification messages to the log file on the Avaya
Ethernet Routing Switch 8300.
Prerequisites
You must log on to the Global Configuration mode in the ACLI.
Procedure steps
1. Enable the transmission of the notification control by using the following command:
2. Disable the transmission of the notification control by using the following command:
PoE port settings configuration
Use the procedures in the following sections to configure the ports on the PoE card.
PoE port settings configuration navigation
•
Enabling and disabling PoE port power administration
•
Configuring the PoE port priority for power allocation
•
Configuring PoE port power limits
54
Configuration — Power over Ethernet
Sets the power limit on the PoE card. The power limit can be
from 37 to 800.
poe notification slot<slotlist>
no poe notification slot<slotlist>
Value
on page 55
on page 55
on page 56
May 2011