PortCurrentOverload Counter
PortMPSAbsentCounter
PowerPairs
MeasuredVolt
MeasuredCurrent
MeasuredPower
Configuration — Power over Ethernet
Field
Software counter to indicate the number of detected over-
current conditions.
Software counter to indicate the number of detected under-
current or absence of Power Maintenance Signature
conditions.
Describes or controls the pairs in use. Field values are as
follows:
Signal means that only the signal pairs are in use.
Voltage applied on the PoE port measured in volts. The
value is always single.
Current drawn on the PoE port measured in milliamperes
(mA).
The PoE port power consumption measured in watts.
Configuring the PoE port
Description
May 2011
37