Adjusting Print Speed And Resolution - Tektronix Phaser 360 User Manual

4
Printing Basics

Adjusting print speed and resolution

4-4 Phaser 360 Color Printer
You can adjust the print quality and speed for different documents and
purposes. Standard, the default setting, provides the best reproduction for
most business printing at 300 x 300 dots per inch (dpi). Select Fast Color for
the fastest printing, and select Enhanced for the highest resolution.
Print-quality Uses
mode
Standard (default) Crisp, bright prints; suitable for
most office printing
Recommended mode for
high-quality transparencies:
produces vibrant, saturated
prints with smooth color
transitions
Fast Color Quick presentations; drafts
Enhanced Superior text resolution and
smoothest color transitions on
paper (at 800 x 450 dpi)
For transparencies when
very fine detail is important
(at 600 x 300 dpi)
If you have installed a driver from the printerÕs CD-ROM, select
print-quality modes from your computer: refer to the table on page 4-20 for
menus for Windows applications; refer to page 4-36 for Macintosh menus.
You can also select print quality at the printerÕs front panel. Refer to the
table on page 4-3 for the front panel selections.
Speed
(pages per minute)
4 ppm paper
2 ppm transparency
6 ppm paper
5.5 ppm transparency
2 ppm paper
2 ppm transparency