Tektronix Phaser 360 User Manual page 237

Section 10 – Stability and reactivity
Stability: Stable.
Incompatibility with Other Materials:
Hazardous Polymerization:
Section 11 – Toxicological information
Toxicity: Not toxic, as determined by standard laboratory tests for acute oral toxicity.
Skin Irritation: Not an irritant, based on standard tests.
Skin Sensitization: Not a sensitizer, based on standard tests.
Carcinogenicity: Components or product not listed by IARC, NTP, or OSHA.
Section 12 – Ecological information
No known impact.
Section 13 – Disposal considerations
These products are not a hazardous waste as specified in 40CFR 261. Dispose in accordance with all federal, state,
and local regulations.
Section 14 – Transport information
D.O.T.: Not regulated.
NMFC: 101720 Sub. 3 - Ink, Printing, N.O.I., Class 55.
Section 15 – Regulatory information
TSCA: All components of these inks are listed in the Toxic Substances Control Act inventory as verified by our
suppliers.
SARA: Not reportable.
RCRA: TCLP below hazardous waste levels set by EPA.
CERCLA: No reportable quantity for this material.
California Prop. 65: Not listed.
Section 16 – Other information
Original preparation date: March 10, 1994 RC
Corrected MS & WV address 4/20/95 RC
Revised product use 11/5/96 JMP
Corrected Flash Point 4/28/97 JMP
Revised product use 12/5/97 JMP
Tektronix, Incorporated
P.O. Box 500
Chemical Documentation
Mail Stop 46-840
Beaverton, Oregon 97077
Printer information: 1-800-835-6100
MSDS information: (503) 627-7255
None.
Will not occur.
Regulatory Information and Specifications
User Manual
11
11-5