Cleaning For Ink Smears And Jams: Internal Paper Path - Tektronix Phaser 360 User Manual

7
Caring For Your Printer

Cleaning for ink smears and jams: internal paper path

7-20
Phaser 360 Color Printer
Approximate time to complete: 3–6 minutes
Clean the printerÕs internal paper path surfaces if you note the following:
Your prints have stray ink marks on the front or the back.
The media is wrapping around the large black roller inside the exit
cover.
Caution
Always use clean sheets of paper to clean the paper path. Do
not reuse cleaning sheets. High-grade, heavier papers, such as
2
120 g/m (32 lb.) bond, work best.
Do not attempt duplex (two-sided) printing on any type of media. Ink
already present on the media offsets onto the internal paper path,
requiring you to perform cleaning procedures.
Load at least 10 sheets of clean, high-grade paper into the printer.
1.
If your printer is conÞgured with just the upper media tray, load
that tray. If you have installed the Lower Paper Tray Assembly,
you can load either the upper tray or the lower tray. If you use the
lower paper tray, make sure that the printerÕs default has been
reset so that the printer will feed paper that it needs for its
cleaning procedures from the lower paper tray only. Refer to
ÒSelecting the Cleaning Page sourceÓ on page 7-16 for instructions.
9922-20