Specifications - Tektronix Phaser 360 User Manual

11
Regulatory Information and Specifications
Specifications
11-8 Phaser 360 Color Printer
Printer tilt
Place the printer on a level surface with no more than 3 degree tilt in any
direction, equivalent to raising one corner of the printer approximately 2 cm
(0.75 in.).
Tilting the printer more than 3 degrees causes drum fluid to
Caution
leak from the maintenance tray resulting in damage to your
printer not covered by the printer's warranty.
Temperature
10¡ C to 32¡ C (50¡ F to 95¡ F)
Operating:
Ð30¡ C to +60¡ C (Ð22¡ F to 140¡ F)
Nonoperating:
Ð30¡ C to +60¡ C (Ð22¡ F to 140¡ F)
Storage:
Humidity
10% to 80% Relative Humidity, noncondensing
Operating:
10% to 95% Relative Humidity, noncondensing
Nonoperating:
Altitude
0 to 2,400 meters (0 to 8,000 feet)
Operating:
0 to 15,000 meters (0 to 50,000 feet)
Nonoperating:
Primary voltage ranges
87 Ð 128 VAC, 115 VAC nominal
174 Ð 250 VAC, 220 VAC nominal
Frequency range
48 to 66 Hz
AC input ratings
115 VAC, 10 Amps
220 VAC, 5 Amps