Interface Cables And Adapters - Tektronix Phaser 360 User Manual

Interface cables and adapters

Description
Parallel cable
Connects the printer's parallel port to
a PC or workstation parallel port.
Parallel/Centronics adapter
Adapts your system's existing
low-density, Centronics parallel cable
connector to the printer's high-density
parallel connector.
SCSI-2 HD to SCSI-1 LD cable
Connects the printer's SCSI port to a
hard disk drive.
SCSI-1 LD to Macintosh SCSI cable
Combine with 013-0297-00 to connect
the printer's SCSI port to a hard disk
drive with Macintosh SCSI 25-pin
plug.
SCSI-1 LD to SCSI-2 HD adapter
Use with either 012-1465-00 or
012-1299-00 to convert a low-density
SCSI connection to a high-density
SCSI connection.
Supplies, Accessories, and Expanding Your Printing System
The following cables and adapters are available through Tektronix or your
dealer. Contact your dealer for other cables and adapters.
Connectors and cable length
36-pin high-density plug to 25-pin DSUB plug;
3 meters (9.84 feet)
parallel adapter: converts 36-pin low-density 1284-B
plug to 36-pin high-density 1284-C plug
50-pin high-density plug to 50-pin low-density plug;
2.0 meters (6.56 feet)
50-pin low-density plug to Macintosh SCSI 25-pin plug 012-1299-00
SCSI adapter: converts 50-pin low-density plug to
50-pin high-density plug
10
Order number
012-1468-00
013-0299-00
012-1432-00
013-0297-00
10-7
User Manual