Printed Colors Are Not What You Expected - Tektronix Phaser 360 User Manual

Printed colors are not what you expected

For information on selecting TekColor color corrections for accurate color
reproduction, see ÒAdjusting the color of your printsÓ on page 5-2.
Select another Color Correction option and print your image
again.
If you are not using a supported driver (installed from the
printerÕs CD-ROM) and are sharing the printer with other users
on a network, another user may have changed the printer's color
adjustment setting.
If you use the driver's Use Printer Setting option and printed
colors are not what you expected, check the following:
A selection may have been made in the TekColor Correction
menu on the printer's front panel. These settings change the
printer's color correction setting.
A color correction utility Þle may have been downloaded to the
printer. These Þles change the printer's color correction setting.
See also ÒSharing the printer on a networkÓ on page 8-34.
Troubleshooting
8-31
User Manual
8