Tektronix Phaser 360 User Manual page 33

3.
To load transparencies:
Handle transparencies by the edges and with both hands to
a.
avoid Þngerprints and creases, which can result in poor print
quality.
Load up to 50 transparencies in the standard paper tray (the
b.
bottom line on the Þll label) and 175 sheets (about three boxes)
in the transparency tray (the Þll line indicates the maximum
capacity).
Set the switch on the side of the tray to Transparency..
c.
Load Tektronix premium transparencies with the notch in the
d.
back, right corner of the tray. Load standard Tektronix
transparencies in any orientation.
Getting Set Up
9922-06
User Manual
2
2-13