Tektronix Phaser 360 User Manual page 131

Windows 3.1 users
Note
Use the following procedure only if your computer is connected to
the printer through the parallel port. Do not do this procedure if
the printer is connected over a network port.
From the Control Panel, double-click Printers.
1.
In the Printers dialog box, select the Tektronix Phaser 360 printer,
2.
then click Setup. A dialog box appears with the printerÕs name
across the top.
Click the PostScript tab.
3.
In the Performance Options Þeld, select the Use PostScript
4.
Level 2 Features option.
Click the Job Control tab.
5.
For better performance, select the Binary Mode option.
6.
From your application, choose the Tektronix Phaser 360 as
7.
your printer.
Try printing the document again.
8.
Printing: Beyond the Basics
User Manual
5
5-17