Tektronix Phaser 360 User Manual page 169

8.
To clean the lower white plastic rollers:
Use either the prepackaged alcohol-soaked cloth or fold a
a.
lint-free cloth into a 2-inch square and soak with alcohol.
Place and hold the cleaning cloth on top of each lower white
b.
roller while turning the individual roller with your thumb and
foreÞnger.
Scrub each roller thoroughly until clean. If the cloth becomes
c.
dirty, discard it and use another.
Put the maintenance tray back in the printer, pushing on both
9.
sides of the maintenance tray to latch it Þrmly in place.
Close the front cover.
10.
If the problem persists: Refer to ÒCleaning for ink smears: paper-exit pathÓ on
page 7-28.
Caring For Your Printer
9922-119
7-27
User Manual
7