Tektronix Phaser 360 User Manual page 29

Install the maintenance tray by sliding it into the printer. Make
4.
sure that the tray slides in straight on both sides.
Using both thumbs, push the tray in Þrmly until it latches.
5.
Close the front cover.
6.
Caution
If you move or ship the printer, be sure to remove the
maintenance tray to protect the printer from damage. Refer to
"Moving or shipping your printer" on page 7-2 for more
information.
Getting Set Up
9922-38
9922-150
User Manual 2-9
2