Table of Contents
Advertisement
Page 106 of 212
Reboot Core/Net 1
NN43021-461
Standard 06.03
Performing the upgrade
Procedure 27
Rebooting Core 1
CAUTION — Service Interruption
Service Interruption
The INI may take up to 15 minutes to complete.
CAUTION — Service Interruption
Service Interruption
Call processing is interrupted for approximately 60
minutes while the procedures are completed.
At this stage, Core 0 is still the active call processor with Clock Controller 0
active. The following procedure will transfer call processing from Core 0 to
Core 1, switching Clock Controller from 0 to 1.
1
In Core/Net 0 only, faceplate-disable the CNI cards.
2
In Core/Net 0 only, faceplate-disable the IODU/C card.
3
In Core/Net 0 only, unseat the Core Processor card.
4
Faceplate-disable Clock Controller 0 and unseat the card.
5
Press the 'INIT' button on the CP PIV card faceplate in Core/Net 1 to
initialize the system.
June 2014
Advertisement
Table of Contents
