Table of Contents
Advertisement
Figure 51
Element manager: Home - System Overview
Initially, you can be prompted to enter the Call Server IP address,
because the Call Server is used for web logon authorization. The Call
Server IP address is a requirement, because unless you entered
additional configuration parameters during the Signaling Server
installation, the node configuration data file containing the Call Server IP
address does not yet exist.
3
Enter a Level 1 or Level 2 user ID and password. If configured, you can
also use a Limited Access Password (LAPW) user ID and password.
If this is the first time the Call Server is accessed, the default Level 1 or
Level 2 user ID and password must be used.
If the logon is successful, the Element Manager "Home - System
Overview" screen appears (see Figure 51 on
This screen identifies the components of your CS 1000 system.
4
Click the "+" symbol in front of the Signaling Server component.
lnstalling a Signaling Server
61C to CS 1000M SG CP PIV Upgrade
Page 189 of 212
page
189).
Advertisement
Table of Contents
