Table of Contents
Advertisement
Page 170 of 212
NN43021-461
Standard 06.03
lnstalling a Signaling Server
Figure 39
Selected J2-J5 plate on back panel of UEM
8
Establish an ELAN port on the back panel of the UEM.
a.
Insert the end of one of the RJ-45 CAT5 Ethernet patch cables
(supplied) into the ELAN network interface (ELAN port) on the Server
faceplate.
b.
Route the Ethernet patch cable through the hole you made in the
back panel of the UEM.
c.
Plug the other end of the Ethernet patch cable into one of the
Ethernet port couplers mounted in the Ethernet port adapter plate.
d.
Label the Ethernet port coupler as ELAN.
See Figure 40 and Figure 41.
June 2014
Advertisement
Table of Contents
