Table of Contents
Advertisement
Page 140 of 212
NN43021-461
Standard 06.03
Performing the upgrade
14 Select to enable/disable CSU option.
Note: if Sequential is selected <1>, upgrades to the MG 1000Es are
performed across the LAN in a sequential manner. One MG 1000E is
upgraded at a time. No other MG 1000E upgrades are initiated until the
current MG 1000E completes its installation.
If Simultaneous is selected <2>, upgrades to the MG 1000Es are
performed simultaneously across the LAN. Up to eight MG 1000Es are
upgraded at the same time. If there are more than eight MG 1000Es, the
upgrade to the next MG 1000E begins after the upgrade of one MG 1000E
is complete. The following warning is presented to the installer:
WARNING:
Call Processing is not guaranteed to operate on the call server
during simultaneous upgrades.
Do you wish to proceed? (y/n)
Set Automatic Centralized Software Upgrade Mode to:
Please enter:
<CR> -> <1> - Sequential
<2> - Simultaneous
Enter choice>
>Processing the install control file ...
>Installing release 0600x
June 2014
Advertisement
Table of Contents
