Avaya 1000M Upgrade page 112

Page 112 of 212
NN43021-461 Standard 06.03
Performing the upgrade
19 Reposition the EMI shield (it looks like a brass grill) in the base of the
module. Tape over the front mounting tabs to hold the shield in position.
You will remove the tape later.
WARNING
If you do not tape the EMI shield in position, you will not
be able to install the card cage in the module correctly.
CAUTION — Service Interruption
Damage to Equipment
Check for and remove any debris (such as screws) that
fell into the base of the UEM module.
June 2014
End of Procedure