Avaya 1000M Upgrade page 23

Figure 2
Meridian 1 Option 61C to Meridian 1 Option 61C CP PIV side-by-side
UEM
UEM
UEM
Core/Net 0
(replace UNIT with
CP card cage)
UEM
UEM
Core/Net 1
(replace UNIT with
CP card cage)
This upgrade takes a Meridian 1 Option 61C to a single-group Meridian 1
Option 61C with CP PIV. CP PIV cards are located in the Core/Net modules
or card cage (see Figure 3 on
• The card cages in the existing Core/Net modules are replaced with
NT4N40 CP card cages.
• Existing network cards are relocated to the NT4N40 CP card cage.
• The existing Clock Controllers are moved from the old Core/Net to the
CP PIV Core/Net in slot 9.
• An IPE module can be installed on top of CP PIV Core/Net 0 module.
Introduction
page 24).
61C to CS 1000M SG CP PIV Upgrade
Page 23 of 212