Page 130 of 212
CS 1000 Release 7.5 upgrade
NN43021-461
Standard 06.03
Performing the upgrade
10 Check applications.
Upgrading the software
Procedure 40 outlines the steps involved in installing CS 1000 Release 7.5
for the CP PIV processor.
Procedure 40
Upgrading the software
1
Check that a terminal is now connected to COM 1port in CP 1. The
settings for the terminal are:
a.
Terminal type: VT100
b.
9600 Baud
c.
Data bits: 8
d.
Parity: none
e.
Stop bits: 1
f.
Flow control: none
2
Insert the RMD into the CF card slot on Call Processor 1 (inactive).
3
Perform a KDIF in LD 143.
4
Press the manual RESET button the Call Processor 1 (inactive) card
faceplate.
June 2014
End of Procedure