FUTABA T32MZ Instruction Manual page 99

The Dial Monitor displays the current position and step
amount of each digital trim. The trim step can be set
directly on the dial monitor.
Displays the current position (black ) and last operating
position (green ) of the VRs and slider levers.
The Dial Monitor displays the current position and last
operating position of each knob and lever. Although
neither knob nor lever can hold the last operation position
as they are "analog" type, the position data during the
last operation is memorized in the model memory. By
moving the knob and lever to the position displayed on
the monitor, the last operation position is recalled.
The trim step of the T1-T6 can be set directly on the dial
monitor menu.
The dial position data at the last operation is displayed
for each knob and lever in this monitor. (Green arrow)
＜ Linkage Menu ＞
99