FUTABA T32MZ Instruction Manual page 135

This function is used when powerful brake operation is necessary.
[Glider, 2 ailerons or more]
[Glider, 2 ailerons or more]
[Airplane, general]
This is dedicated mixing when a gyro is used.
This function adjusts the left and right rudders of winglet models.
The operation speed when the motor of F5B and other EP gliders is started by switch can be set.
[EP glider, general]
This function is used to correct roll maneuvers, knife edge, etc. of stunt planes.
[Airplane, general]
This function selects the snap roll switch and adjusts the steering angle of each rudder. Servo speed can also be
adjusted.
[Airplane general]
[Airplane, general]
[Glider/EP glider]
(Main Aileron)
AIL 3
(Chip Aileron)
ELEVATOR
(RUDDER 2)
[Airplane/glider, general]
FLP 3
(Brake Flap)
FLP 1
(Camber Flap)
AIL1
RUDDER
ELEVATOR 2
ELEVATOR
(AILERON 6)
(AILERON 5)
at AILEVATOR
V-TAIL
RUDDER
(ELEVATOR 2)
AIR BRAKE
FLP 4
(Brake Flap)
FLP 2
(Camber Flap)
AIL 2
(Main Aileron)
at Flying wing
RUDDER 1
( )
Winglet
at Flying wing
＜ Model Menu (Airplane/Glider Functions) ＞
AIL 4
(Chip Aileron)
RUDDER 2
( )
Winglet
at Flying wing
135