FUTABA T32MZ Instruction Manual page 125

Before setting the model data, use the Model Type
function of the Linkage Menu to select the model type
matched to the fuselage. When another model type is
selected thereafter, the AFR, program mixing, and other
setting data are reset.
The functions in the Model Menu can be set for each
Flight conditions addition, deletion, copy, condition renaming, and condition delay can be set.
Sets the rudder angle and curve of all the operation functions. A D/R curve which can be switched with a
switch, etc. can also be added.
Mixing used in needle adjustment of engines which use a fuel mixture control carburetor. [Airplane,
helicopter]
flight condition. When you want to use the system by
switching the settings for each condition by switch, stick
position, etc., use the Condition Select function to add
＜ Model Menu (Common Functions) ＞
125