FUTABA T32MZ Instruction Manual page 151

This function is used when an air brake is
necessary when landing or diving, etc.
The offset amount of the aileron, elevator, and
flap servos can be adjusted as needed. Also the
speed of the aileron, elevator, and flap servos
can be set for each condition, and a Cut switch
You can also set the Auto Mode, which will link
Airbrake to a stick, switch, or dial. A separate
switch.
display screen is an example. The actual screen depends on the model type. The screen
switch is set.
setting
(For a description of the setting method, see the
(When 2 ailerons model type selected)
Note: The input numerics are examples. Adjust the
travel to match the fuselage.
(at AILEVATOR)
FLP 2
a description of the setting
method, see the description
and cut switch setting.
＜ Model Menu (Airplane/Glider Functions) ＞
ELEVATOR 2
ELEVATOR
AIL1
151