FUTABA T32MZ Instruction Manual page 153

This function is used when a gyro is used to
switched with a switch.
simultaneously controlled.
5CH → GYRO
Rate
1
2
3
*Set so that Rate1 is turned on at the back position of switch E and
AVCS
GAIN 0％
NORMAL
When AVCS is used we
recommend that the
sensitivity CH be set to
the 3-position.
7CH → GYRO2 8CH → GYRO3
ACT Type Switch
OFF/ON GY
INH
ON/OFF GY
＜ Model Menu (Airplane/Glider Functions) ＞
Function menu of the Linkage Menu to assign the sensitivity
beforehand.
(For more information, see the
Control and Trim → NULL
GYRO GYRO2
SE AVCS : 60% AVCS : 60%
SE NORM : 60% NORM : 60% NORM : 60%
S.BUS Receiver
GYA451
GYA451
S.BUS2 port
GYA450
GYRO3
AVCS : 60%
Aileron servo
Elevator servo
Rudder servo
153