FUTABA T32MZ Instruction Manual page 38

the touch screen.
① Timer
If one of two timer displays is pushed, you will
enter the Timer screen of a Linkage menu.
In the button mode of a timer set, it can also
be made a start/stop.
A push on reset will reset a time.
② Menu Button
• System menu • Linkage menu
③ System Selection
• FASSTest18CH • FASSTest12CH • FASST
MULTI • FASST 7CH • S-FHSS • T-FHSS
④ System timer/Reset
• This shows the total accumulated time used for
the transmitter. This can be reset.
(Hour):(Minute):(Second)
Push this area to reset the timer.
⑤ Voltage of Rx/Ext battery
Information from the receiver is displayed
when using a bidirectional system.
FASSTest/T-FHSS Only.
⑥ Home2
A timer and Telemetry data change to Home2
screen by which it was indicated by expansion.
⑦ RF Indicator
"ON AIR" or "RF OFF"
⑧ Digital trim (T1 to T6)
Push this area to enter the Dial Monitor screen.
*Please note that the screens in this manual may
differ slightly from the actual transmitter.
⑤
①
②
③
④
＜ Basic Operation ＞
38
⑨ User's name
Push this area to enter the User's Name
Setting screen.
⑩ Condition
The condition name that is currently used is
displayed here.
• Push this area to enter the Condition
Select screen.
⑪ Battery Indicator
•When the remaining battery reaches 10%,
the alarm will beep. Land your aircraft
immediately.
⑫ Menu Button
• Model menu
⑬ Model Name
The model name that is currently used is
displayed here.
• Push this area to enter the Model Select
⑭ Clock
This shows the today's date and the current
time.
• Push this area for the Date & Time Setting
⑥ ⑦ ⑧
screen.
screen.
WARNING
aircraft.
Check the remaining battery as often as possible and
try to charge the battery regularly. If the battery alarm
sounds and its warning symbol is displayed, land your
aircraft immediately.
⑨ ⑩ ⑪
⑫
⑬
⑭