FUTABA T32MZ Instruction Manual page 25

microSD Card (sold separately)
The microSD card can store various files, such as
model data, music, sound files and pictures. Any
microSD card on the market can be used with the
T32MZ. The card is locked when it is pushed in all
the way in. To remove the card, push in on the card
again, it will pop up allowing you to remove it.
Model data of the microSD card is used for storage.
Direct flight is not possible with microSD card
model data. Copy to T32MZ and use it.
WARNING
Be sure to turn off the power to the transmitter
before inserting or removing the microSD card.
As the microSD card is a precision device, do
not use excessive force when inserting.
If model data generated by a new software
version transmitter is copied to an old software
version transmitter, the transmitter may operate
erroneously. Copy the model data after updating
the copy destination transmitter to the new
software version.
Read data from a PC
Saving music and image files edited by a PC
into the microSD card, you can use those files on
your T32MZ transmitter. Equipment for reading
and writing microSD cards are available at most
electronics stores.
Stored data
The life of the microSD card is limited due to the use
of flash memory. If you have a problem saving or
reading data such as picture data after a long period
of use you may need to purchase a new microSD
card.
*We are not responsible for, and cannot compensate for any
failure to the data stored in the memory card for any reason.
Be sure to keep a backup of your models and data in your
microSD card.
*No need for backup battery; T32MZ transmitters and
microSD cards are using nonvolatile memory devices so that
the data stored in those will not be destroyed even without a
backup battery. The clock for the transmitter depends on the
Lithium battery.
＜ Before Use ＞
25